CNC Variable Lathe machine (T400/750V&T460/750V&T500/750V)
Over bed: 400/460/500mm
Max. Turning length: 620/870/1370
Spindle bore: Ø 80mm
This machine has the following features:
Longitudinal and cross feeds are effected by ball leadscrews. Driven by servo motors.
Either vertical or horizontal 4-station or 6-station tool post or gang tools can be selected. The post is located on precision contrite gears with a high repeated positioning accuracy.
Both chuck and tailstock are supplied with hydraulic or manual type.
The surface of the bedways is supersonic frequency hardened and precision ground with a long service life.
The spindle bore size is Ø 80mm. The spindle system is high in the rigidity and accuracy.
|(Gang tools)||(Gang tools)||(Gang tools)|
|Maximum turned length ||750/100/1500mm|
|Max. turning length ||620/870/1370 mm|
|*Effective length of gap||200mm|
|Cone hole diameter and taper of spindle hole||MT.No7|
|Steps of spindle speed (Manual)||Variable|
|Range of spindle speed||100~2000r/min|
|Rapid feed for Axis Z||10m/min|
|Rapid feed for Axis X||8 m/min|
|Max. travel of Axis Z||710/960/1460 mm|
|Max. travel of Axis X||250/330mm(Gang tools)|
|Tool post stations||4-ways or 6-ways or gang tools|
|Tool cross section||25×25 mm|
|Taper of bore||MT.No.4||MT.No.5|
|X/Z motor torque||4.7/7Nm|
|Power of main motor||5.5KW(Extra 7.5KW)|
|Power of cooling pump ||75W|
|Note: The items with "*"are only for 62series|