CNC Lathe Machine (T400/750&T460/750)
Over bed: 400/460mm
Maximum turned length: 750/1000/1500mm
Max. Swing in gap: 660/700mm
Spindle bore: 80mm
This machine has the following features:
Longitudinal and cross feeds are effected by ball leadscrews. Driven by servo motors.
Either vertical or horizontal 4-station or 6-station tool post or gang tools can be selected. The post is located on precision contrite gears with a high repeated positioning accuracy.
Both chuck and tailstock are supplied with hydraulic or manual type.
The surface of the bedways is supersonic frequency hardened and precision ground with a long service life.
The spindle bore size is Ø 80mm. The spindle system is high in the rigidity and accuracy.
|Over bed||Ø400 mm||Ø460 mm|
|Over carriage||Ø210/Ø165 mm||Ø250/Ø105 mm|
|(Gang tools)||( Gang tools)|
|Maximum turned length ||750/1000 /1500 mm|
|Max. turning length ||620/870/1370 mm|
|*Max. swing in gap||Ø660 mm||Ø700 mm|
|*Effective length of gap||300 mm|
|Cone hole diameter and taper of spindle hole||MT No.7|
|Steps of spindle speed(Manual)||12|
|Range of spindle speed||38~1680 r/min|
|Rapid feed for Axis Z||10m/min|
|Rapid feed for Axis X||8m/min|
|Max. travel of Axis Z||710/960/1460 mm|
|Max. travel of Axis X||250/330 ( Gang tool )|
|Tool post stations||4-ways or 6-ways or gang tools|
|Tool cross section||25×25 mm|
|Taper of bore||MT No.4|
|X/Z motor torque||4.7/7Nm|
|Power of main motor||5.5KW(7.5KW)|
|Power of cooling pump ||75W|
|Overall dimensions(L×W×H)||2060/2310/2790×1150×1450 mm|
|Net weight||2250 \ 2450 \ 2950|
|Note: The item with "*:" are only for 62 series|