CNC Large Lathe T1000/1500&T1250/1500
Max. Swing over bed: 1000/1250mm
Max. Swing over carriage: 620/870mm
Maximum length of workpiece: 1500-8000mm
This machine has the following features:
Mateched with FANUC SIGMENS or NC system high-reliability because of its STD totalline strnc-tion, CRT showing, line and circle in-terpolation.
2 axle closs-circle control, AC servo motor, Semi-closed loop control system. High-strength casting bed with high-frequency chilling and priecise grinding.
Slidewaygluded low-fricton plastics.
Spindle with frequening converter and stepless variable drive.
Suited for cutting workpieces which have various shapes and sizes.
Longitudinal and cross feeds are effected by servo motor drive through ball screws.
Φ 130mm spindle bore, short taper positioning spindle nose for high precision and rigidity.
Centralized lubrication system in headstock for less heating and heat distortion.
Supersonic frequency hardened guide ways to ensure high precision and long service life.
|Main Specification and Parameters|
|Max. swing over bed||Ø1000 mm||Ø 1250mm|
|Max. swing over carriage||Ø620 mm||Ø 870mm|
|Width of bed||755 mm|
|Maximum length of workpiece||1.5/2/3/4/5/6/8m|
|Max. turning length||1.3/1.8/2.8/3.8/4.8/5.8/7.8m|
|Max. weight between centers||5000 kg|
|Spindle bore||Ø130 mm|
|Cone hole diameter and taper of spindle hole||Metric Ø140 1 : 20|
|Steps of spindle speed(Manual)||24 ( forward )|
|12 ( reverse )|
|Range of spindle spec||2.5 ~ 250 r/min|
|Rapid feed for Z axis||8m/min|
|Rapid feed for X axis||5 m/min|
|Max. travel of Axis X||600 mm|
|Max. Input||0.001 mm|
|Tool post stations||4 station|
|Tool cross section||40×40 mm|
|External diameter of tailstock sleeve||Ø160 mm|
|Taper of bore of tailstock sleeve||Metric Ø80|
|Max. traverse of tailstock sleeve||300 mm|
|X/Z motor torque||33/37Nm|
|Spindle motor power||22KW|
|Power of cooling pump||0.25KW|
|Note : For each additional machine length of 1m, there will be additional net weight of 1100kg|