Spiral Tube Forming Machine (ACE-2-2000-G )
performance
Description The module technique gives the customer the possibility to choose between a number of options, allowing him to create a machine a number of options, allowing him to create a machine for his specific needs. The frequency controlled main drive ensures a smooth acceleration and an almost noiseless operation. The outstanding patented flying slitter cuts the tubes to lengthwithout noise or hot sparks as known from the saws and provides smooth tube ends without deburring. The design and options fulfill the needs in HVAC to produce in mild steel, galvanized steel, stainless steel or aluminum The corrugation unit allows a reduction in material costs and makes the bigger diameter tubes more rigid.
Description
The module technique gives the customer the possibility to choose
Between a number of options, allowing him to create a machine a number of options, allowing him to create a machine for his specific needs.
The frequency controlled main drive ensures a smooth acceleration and an almost noiseless operation.
The outstanding patented flying slitter cuts the tubes to lengthwithout noise or hot sparks as known from the saws and provides smooth tube ends without deburring.
The design and options fulfill the needs in HVAC to produce in mild steel, galvanized steel, stainless steel or aluminum
The corrugation unit allows a reduction in material costs and makes the bigger diameter tubes more rigid.
This machine has the following features
Description The module technique gives the customer the possibility to choose between a number of options, allowing him to create a machine a number of options, allowing him to create a machine for his specific needs. The frequency controlled main drive ensures a smooth acceleration and an almost noiseless operation. The outstanding patented flying slitter cuts the tubes to lengthwithout noise or hot sparks as known from the saws and provides smooth tube ends without deburring. The design and options fulfill the needs in HVAC to produce in mild steel, galvanized steel, stainless steel or aluminum The corrugation unit allows a reduction in material costs and makes the bigger diameter tubes more rigid.
| Diameter |
100-2000mm |
| Material specification |
Galvanized plate: 0.5-1.2mm, width137mm; |
| 1.3-2.0mm, width155mm |
| Stainless steel: 0.5-1.2mm,width137mm |
| Uncoiler |
Vertical type, inner coil: 460~520mm, load capacity: 1,200kg |
| Joining overlock |
On the outer surfaces of pipes |
| Feeding speed |
0-30m/min, adjustable |
| Cutting mode |
Roller shear cutting and synchronous plasma cutting |
| Dynamic system |
Cutting and turning over ducts adopt pneumatic; |
| Compaction of feed rolls adopts hydraulic |
| Forming mold |
Made of steel |
| Total weight |
2200kg |
| Dimensions |
Main machine: 3.4x1.8x1.8 m |
| Run out table: 2*1.2*1.1 m |
| Power |
23KW. Main motor: 22kw, |
| Hydraulic motor:0.75kw, |
| Top-wheel motor: 0.12kw |
| Power supply |
380V/50Hz/3ph |
| Fixed-scale cutting |
Pipe length measuring system |
Audited Supplier 
){kind=link}
){kind=link}